Astroturf. is mot type 1 permeable?

Setts and cobbles, tarmac, asphalt, resin systems, concrete whether it's plain, patterned or stencilled, gravels, etc.
Post Reply
KAMIKAZEE DIY
Posts: 139
Joined: Thu Feb 27, 2014 8:45 pm
Location: Scotland

Post: # 119402Post KAMIKAZEE DIY

Thinking of installing a small area of astroturf. Area is flat. Concerned about the recommendations to lay astroturf on compacted sharp sand above compacted type 1. Can water drain through this?
Cheers

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 119403Post dig dug dan

No. Best lay on crushed, blind it with grano dust. Not sand
Or dont lay the stuff at all, consider the environment!,
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 119426Post Tony McC

Comp[acted TRype 1 is just about permeable. It all depends on where the line is drawn between what we consider 'permeable enough' and not sufficiently permeable. For something like placky grass, compacted type 1 is regarded as 'permeable enough' because it's coefficient of permeability is similar to that of many soils.

However, for a dedicated permable surfacing, notably concrete block permeable paving (CBPP) and some permeable macadams and resin bound surfaces, a Type 3 agregate sub-base is required to ensure there is no flooding at times of storm conditions.

This issue of "how permeable does it need to be" is becoming an ever-bigger problem because of the growth in popularity of resin bound surfaces. many installers (and too many suppliers) are claiming a Type 1 sub-base will be adequate, but the top installers/suppliers are increasingly opting for a Type 3 aggregate sub-base to ensure adequate permeability.
Site Agent - Pavingexpert

Post Reply