I've scoured the site, but cant seem to find what I am after. What's the best method of block paving edging when there is a fence at the side of the drive? Its a normal concrete post + concrete base panels, then wooden fence panels on top.
I've seen a few drives where they have blocked right up to and touch the base panels and I assume they just put 50mm concrete underneath, but others have kept 200mm away and I assume haunched it and then put decorate gravel on top.
advice appreciated!
Block paving against concrete fence post/panels?
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
FirstTimePaver
- Posts: 4
- Joined: Fri Aug 18, 2017 5:26 pm
- Location: manchester
-
lutonlagerlout
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
FirstTimePaver
- Posts: 4
- Joined: Fri Aug 18, 2017 5:26 pm
- Location: manchester
-
dig dug dan
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
as long as the fence is nice and straight, or it will stick out like a sore thumb!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"