How to remove masking tape from salte

General banter, tradesmen, recommendations and warnings, surplus materials, humour and owt else!
Post Reply
r4vvm
Posts: 46
Joined: Sun May 04, 2014 3:19 pm
Location: United Kingdom

Post: # 113018Post r4vvm

I put some masking tape on slate to stop the cement going over the surface while laying them.
Trying to remove the tape tried warm water but its not coming off at all, if i try using something sharp it scratches the slate.

Any ideas how to remove it?
Top
lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 113019Post lutonlagerlout

I would guess some kind of solvent mate,white spirits perhaps?
obviously try on an out of the way area first
masking tape is a bastard if left on too long
cheers LLL
"what,you want paying today??"

YOUR TEXT GOES HERE
Top
r4vvm
Posts: 46
Joined: Sun May 04, 2014 3:19 pm
Location: United Kingdom

Post: # 113020Post r4vvm

lighter fluid done the job but left slight stains hopefully will wash away over time?

Does slate need sealing?
Top
Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:
Contact Tony McC

Post: # 113030Post Tony McC

The lighter fluid (it has a complicated chemical name: petrol) will eventually evaporate and leave very little, if any, stain in its wake.

Good quality slate doesn't *need* sealing but some folk believe it looks better/resists staining/lasts longer (all bollocks, of course) when a sealant is daubed all over it.
Site Agent - Pavingexpert
Top
Post Reply

Return to “The Craic”