Slurry pointing - Black granite dust and sbr admixture?
-
- Posts: 2
- Joined: Mon Sep 19, 2016 11:36 am
- Location: Wakefield
I've just laid 100m2 a beautiful Yorkstone driveway using new 75mm thick tumbled setts and would like to slurry point the joints. The setts are laid on 6 inch of hardcore and 5 inch of concrete with an inch of bedding layer. I want to have black joints to show off the beautiful colours, however, due to the joints being so deep it's going to cost in the region of £700 for the jointing compound alone and was thinking of a mortar mix which will be far cheaper. I've found a 3mm to dust black granite and was thinking of using that along with black mortar dye and for added strength an SBR admixture... am I mad?
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
why not just lay the setts onto 6 inches of concrete rather than 5 inches then an inch of bedding?
you could top up the joints to say 20 mm down with good old 3:1 sharp sand cement and then just use a decent "romex D1" or "gtfk 850" slurry mix in basalt to top it off
mortar dye always fail and it will fade in 1 year
LLL
you could top up the joints to say 20 mm down with good old 3:1 sharp sand cement and then just use a decent "romex D1" or "gtfk 850" slurry mix in basalt to top it off
mortar dye always fail and it will fade in 1 year
LLL
-
- Posts: 2
- Joined: Mon Sep 19, 2016 11:36 am
- Location: Wakefield
-
- Posts: 1990
- Joined: Sun Mar 25, 2007 10:49 pm
- Location: N/Ireland
It's common practice to fill deep joints ( even on flags) with cheap slurry and then top them off with the good stuff. Larsen do a product called FJM (flow joint mortar) which costs £8 per bag and goes off in 20 mins. It's available in several colours including basalt and is crazy strong but you need to have your sh#t together when using it because a 3000psi washer won't mark it after and hr if it gets away on you.
Dyes are useless in slurries, they wash out.
Dyes are useless in slurries, they wash out.
Can't see it from my house
-
- Posts: 1270
- Joined: Mon Aug 10, 2009 8:30 am
- Location: york work anywhere where the stone takes me
- Contact:
I fill all my setts with 4/1 sharp sand cement slurry tip in use stiff yard brush to lower hight use hose with good spray attachment wash off .then clean with cleaner Romex d1 is good and nexus two part is the darker of the two there are some pics on my website of these process
Originalstonepaving.com
The very best in natural stone paving in new and reclaimed materials
M: 07968 582231
The very best in natural stone paving in new and reclaimed materials
M: 07968 582231
-
- Posts: 237
- Joined: Thu Dec 09, 2010 4:41 pm
- Location: Liverpool, Merseyside
- Contact:
This is what they'll look like with the sharp/cement slurry finish
Dempsey Landscaping Liverpool
Natural stone paving & driveway professionals
http://www.landscapingbydempsey.co.uk
Tel: 0151 724 5245
Natural stone paving & driveway professionals
http://www.landscapingbydempsey.co.uk
Tel: 0151 724 5245
-
- Posts: 1000
- Joined: Sun Oct 23, 2011 9:57 am
- Location: southampton, hampshire
-
- Posts: 237
- Joined: Thu Dec 09, 2010 4:41 pm
- Location: Liverpool, Merseyside
- Contact:
Cheers Forest. That was the first sett drive i'd done. They had top garden design company in 3 years prior to that for the gravel job.
Dempsey Landscaping Liverpool
Natural stone paving & driveway professionals
http://www.landscapingbydempsey.co.uk
Tel: 0151 724 5245
Natural stone paving & driveway professionals
http://www.landscapingbydempsey.co.uk
Tel: 0151 724 5245