When do you stop buying stuff

General banter, tradesmen, recommendations and warnings, surplus materials, humour and owt else!
Post Reply
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109056Post Forestboy1978

Basically I'm eternally buying tools. I think, oh just 3 more small buys and this one last big purchase and that's it for at least 2 years but it never happens.

I can't tell if I have a mental disorder or I need this stuff. I mean, yeah, all of it gets used and I am now running as efficiently as I could have imagined myself doing but still I keep buying stuff. It almost seems as if I'm buying more though, rather than less.

When to say enough is enough....

Anyone else have this problem. And does it end or slow down??

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 109057Post seanandruby

Best to be looking at it than looking for it :;): :)
sean

r896neo
Posts: 521
Joined: Wed Feb 22, 2012 9:38 pm

Post: # 109058Post r896neo

I was the same when i started and really the best advice i can give is to not go crazy as later on you will begin to see things as overheads that just sit there and dont earn you any money.

If you use it regularly buy the best you can afford but if its something you wont use regularly try and do without.

Especially in garden maintenance you need to think will this tool make me more money? will i be quicker doing the job or will i be able to take on jobs i otherwise couldnt without it? If the answer is yes you need to charge more. I used to do this by attaching a premium to high hedges which needed my tripod ladder and added on for example £15 to each job needing them. This can help you recoup costs on the purchase but crucially also stay competitive with normal hedges that dont require them. Alternatively you can put up all your prices marginally to cover these costs but i preferred the top up charge type method for items like that.

KAMIKAZEE DIY
Posts: 139
Joined: Thu Feb 27, 2014 8:45 pm
Location: Scotland

Post: # 109059Post KAMIKAZEE DIY

FB, as long as your not buyings straightening irons for your hair etc all tool buying within reason is good.

Gumtree = the source of all evil, got myself two 110v transformers recently, just unfortunate I don't have any 110 tools, but I will find another tool bargain (that I dont need).

I'm just mad keen DIY, but i guess its a fine line between investing in your future and wasting young kids inheritance.........

Good luck
Cheers

dig dug dan
Posts: 2504
Joined: Thu Jul 10, 2003 10:20 pm
Location: hemel hempstead,herts. 01442 212315

Post: # 109060Post dig dug dan

I am still buying tools 20 years on. It never stops!
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 109063Post lutonlagerlout

I always try and buy on quality over price
my hilti hammer drill cost £450 20 years ago but still works perfectly
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

lemoncurd1702
Posts: 712
Joined: Sat Oct 19, 2013 7:56 am
Location: South Wales
Contact:

Post: # 109064Post lemoncurd1702

lutonlagerlout wrote:I always try and buy on quality over price
my hilti hammer drill cost £450 20 years ago but still works perfectly
LLL

£450 20 years ago, that's £1,000 in todays money.

I kinda agree with what your saying if it's something that's in use on an almost daily basis.
I'm happy with cheaper versions of some tools such as drill/drivers, as long as their up to the job as I only occasionally use them.

I wouldn't buy one of those cheap compactor plates that you see on e-bay though. Hell no!
Cheers
Lemoncurd

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 109065Post lutonlagerlout

yes but apart from 2 sets of brushes it has lasted 20 years and still does the proper job!
how much would I have spent on £100 bosch drill in that time?
LLL :)
"what,you want paying today??"

YOUR TEXT GOES HERE

lemoncurd1702
Posts: 712
Joined: Sat Oct 19, 2013 7:56 am
Location: South Wales
Contact:

Post: # 109067Post lemoncurd1702

lutonlagerlout wrote:yes but apart from 2 sets of brushes it has lasted 20 years and still does the proper job!
how much would I have spent on £100 bosch drill in that time?
LLL :)

About a thousand pounds :D but a Hilti would be a waste of money for me. The amount of use it would get, would last me 40 years+.

I've gone through 3 Titan or very similar breakers in the last ten years, but happy with that at £150 a pop. They do as good a job if not better than any others in the class.
And with that label it's like a Skoda, not likely to get stolen. :D
Cheers
Lemoncurd

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 109069Post lutonlagerlout

I agree mate,for me tools that are in use every day are ,the stihl cut off saw,the makita breakr,the hilti drill and mainly the fork :-)
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109079Post Forestboy1978

lemoncurd1702 wrote:
lutonlagerlout wrote:yes but apart from 2 sets of brushes it has lasted 20 years and still does the proper job!
how much would I have spent on £100 bosch drill in that time?
LLL :)

About a thousand pounds :D but a Hilti would be a waste of money for me. The amount of use it would get, would last me 40 years+.

I've gone through 3 Titan or very similar breakers in the last ten years, but happy with that at £150 a pop. They do as good a job if not better than any others in the class.
And with that label it's like a Skoda, not likely to get stolen. :D
Yeah I just bought another Titan. Can't beat it for jules or whatever it's rated in even spending 500+ You get a lighter tool but weaker so what's the point.

I'm on my 3rd in 6 years. The 2nd is still going but needs some work on the electrics. Need 2 anyway on some jobs so I'm repairing it.

I'm leaning towards Husqvarna these days, even echo rather than stihl but at the moment everything is Stihl but that will change over the years. Makita for handheld stuff cos it lasts and generic 5ah batteries are cheap and just as good makita ones.

I just bought a Makita battery chainsaw for my van cos I've fitted an inverter and twin charger for batteries and OMG. I wasn't expecting it to be any good. Just handy to grab for small stuff but it is outstanding. Far exceeded my expectations to such a degree that I'm now thinking of slowly going the way of batteries for all that type of stuff.

Single handed operation is ultra useful, immediate start, no fuel, quiet and cuts really well. Awesome

lemoncurd1702
Posts: 712
Joined: Sat Oct 19, 2013 7:56 am
Location: South Wales
Contact:

Post: # 109080Post lemoncurd1702

Forestboy1978 wrote:
lemoncurd1702 wrote:
lutonlagerlout wrote:yes but apart from 2 sets of brushes it has lasted 20 years and still does the proper job!
how much would I have spent on £100 bosch drill in that time?
LLL :)

About a thousand pounds :D but a Hilti would be a waste of money for me. The amount of use it would get, would last me 40 years+.

I've gone through 3 Titan or very similar breakers in the last ten years, but happy with that at £150 a pop. They do as good a job if not better than any others in the class.
And with that label it's like a Skoda, not likely to get stolen. :D

Yeah I just bought another Titan. Can't beat it for jules or whatever it's rated in even spending 500+ You get a lighter tool but weaker so what's the point.

I'm on my 3rd in 6 years. The 2nd is still going but needs some work on the electrics. Need 2 anyway on some jobs so I'm repairing it.

I'm leaning towards Husqvarna these days, even echo rather than stihl but at the moment everything is Stihl but that will change over the years. Makita for handheld stuff cos it lasts and generic 5ah batteries are cheap and just as good makita ones.

I just bought a Makita battery chainsaw for my van cos I've fitted an inverter and twin charger for batteries and OMG. I wasn't expecting it to be any good. Just handy to grab for small stuff but it is outstanding. Far exceeded my expectations to such a degree that I'm now thinking of slowly going the way of batteries for all that type of stuff.

Single handed operation is ultra useful, immediate start, no fuel, quiet and cuts really well. Awesome
Try changing the cable. They tend to break at the point where it enters the machine.
I change it with a longer cable so your not lugging and extension cable around as well.
Cheers
Lemoncurd

Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 109090Post Forestboy1978

Well last year I fixed the electrics. It was just as the cable enters the machine it had detached I recall. Possibly the same issue.

Good idea re putting an extra long cable on it. Makes sense.

williams
Posts: 166
Joined: Sun Mar 16, 2008 6:01 pm
Location: essex

Post: # 109092Post williams

It never ends, infact it gets worse.

The more work you do, the more the tools wear out and the more they need replacing. :laugh:

Then you realise that the second hand tools you bought end up needing repair three times as much and weren't actually that cheap over a few years so you buy brand new, then you realise the cheap stuff is crap do you buy brand new branded stuff :laugh:

Having a time of it myself recently decided on a new canter tipper as fed up with buying vans that are a few years old with a few dozen problems. 3 husqvarna k760 broke within the last few weeks, so bought a new one and had two repaired, thought I'd buy a load of blades too as they were cheaper buying a load.
Nice new probst block splitter as one of the handles broke last week.
12 year old diesel wacker finally died a while back so going to replace that.
That's not including the seemingly never ending supply of shovels, trowels, hammers broom etc haha

I hate paying for new stuff but I like having it so it's a tough one :laugh:

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 110118Post Dave_L

I don't mind investing in new kit - as it makes me money. Think of a £35k excavator and the money that will return over 6 years - compare that to a new £35k motor car..........you'll loose 20% just driving the damn thing out of the showroom!
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

Post Reply