Manhole

Foul and surface water, private drains and public sewers, land drains and soakaways, filter drains and any other ways of getting rid of water.
Post Reply
cwight
Posts: 39
Joined: Sun Feb 05, 2006 12:47 pm
Location: Holmfirth

Post: # 10873Post cwight

Hi, I hope someone can help, but I'm not sure this is the correct forum. I have to pump the sewage from my house. I have a chamber set underground installed with two pumps inside. The chamber has an integral steel manhole cover. I want to flag over this area, but obviously I need access to the chamber for maintence etc. How do I go about raising something like this, so that the cover is accessible from the patio. I don't want to cut the current cover out from the tank, so I'm presuming something like a recessed tray is the answer. Is it best to simply leave my cover intact and then construct a new access point to it from the patio?

Sorry, I'm a new DIYer at all this, but I'm keen to do the patio myself. But maybe I'm best to get a builder in to deal with this manhole issue.
COLIN

Tony McC
Site Admin
Posts: 8346
Joined: Mon Jul 05, 2004 7:27 pm
Location: Warrington, People's Republic of South Lancashire
Contact:

Post: # 10897Post Tony McC

I'd need to see the cover before I could say what might work - it's probably better to ask a local contractor to take a look, spend half-an-hour picking his brain, and if they come up with summat good, bung him (or her) 20 quid for a pint in acknowledgement of their input.
Site Agent - Pavingexpert

cwight
Posts: 39
Joined: Sun Feb 05, 2006 12:47 pm
Location: Holmfirth

Post: # 10902Post cwight

Ok Thanks, will do.
COLIN

Post Reply