Hi again lads,
I was wondering if anyone reccomends using a white portland cement for a bedding mix for light coloured granites. When laying thin tile a white flexible adhesive is required in order to prevent any impurities in the darker adhesives showing through on the face of the stone. I was wondering if the same principle applies to flags and cobbles. I would imagine it might only apply to thinner flags rather than cubes as the impurities would have a longer distance to travel in the cubes and would probably never see the light of day. Any thoughts would be much appreciated.
Thanks,
Mark.
Light coloured granite sets & cubes - White portland cement bedding mix.
-
- Posts: 373
- Joined: Tue Feb 18, 2003 3:11 pm
- Location: Essex
- Contact:
We manufacture a range of thin bed tile adhesives and colour grouts, which are used, not surprisingly, for bedding and grouting tiles. A different grade is available for thicker bed mortars.
Yes, white is available, and for the reasons you have stated. Colour is very much a personal preference, and recognising the customer is always right, we have to make all available.
The components include white cement and very pure white sands.
Regards
Yes, white is available, and for the reasons you have stated. Colour is very much a personal preference, and recognising the customer is always right, we have to make all available.
The components include white cement and very pure white sands.
Regards
Simeon Osen
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
-
- Posts: 5
- Joined: Wed Jan 18, 2006 4:45 pm
- Location: cork, ireland
Thanks Simeon,
I dont suppose there is any hard and fast rule on the thickness of stone required to prevent any impurities showing through. Since the physical and mechanical properties of granites vary a great deal I dont suppose anyone has come up with a generic chart that links the porosity and absorbtion of stone to impurity migration. As a general rule the more quartz that is in a stone the lighter it is in colour and the more porous it is.If this sounds like a load of "B" ignore it.
Mark.
I dont suppose there is any hard and fast rule on the thickness of stone required to prevent any impurities showing through. Since the physical and mechanical properties of granites vary a great deal I dont suppose anyone has come up with a generic chart that links the porosity and absorbtion of stone to impurity migration. As a general rule the more quartz that is in a stone the lighter it is in colour and the more porous it is.If this sounds like a load of "B" ignore it.
Mark.
mark o regan
-
- Posts: 373
- Joined: Tue Feb 18, 2003 3:11 pm
- Location: Essex
- Contact:
Well we haven't, and I don't know if anyone has. Maybe if it exists you / we will learn of it through this site.
Sounds like an interesting job for someone with plenty of time on their hands.
Sounds like an interesting job for someone with plenty of time on their hands.
Simeon Osen
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
-
- Posts: 5
- Joined: Wed Jan 18, 2006 4:45 pm
- Location: cork, ireland
-
- Posts: 373
- Joined: Tue Feb 18, 2003 3:11 pm
- Location: Essex
- Contact:
Mark
I don't know if it's fair on genuine guru's to describe me as a guru, but I appreciate the compliment.
I don't know if it's fair on genuine guru's to describe me as a guru, but I appreciate the compliment.
Simeon Osen
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
Ronacrete Ltd - http://www.ronacrete.co.uk
Tel: +44 (0) 1279 638 700
Follow us at http://www.twitter.com/Ronacrete
-
- Site Admin
- Posts: 8346
- Joined: Mon Jul 05, 2004 7:27 pm
- Location: Warrington, People's Republic of South Lancashire
- Contact: