Workshop base
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
-
- Posts: 712
- Joined: Sat Oct 19, 2013 7:56 am
- Location: South Wales
- Contact:
-
- Posts: 791
- Joined: Wed Feb 05, 2014 7:50 pm
- Location: leicester
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
thanks its not made to bad but had to re cut/trimm a few little bits and the instructions are painfully vague :rock: there are stupid mistakes like 2 of the part number 12s are longer and part no 15 is labelled 4609
got to get it finished tomorrow got the roof in the back of me van and the doors and windows in the hallway
got to get it finished tomorrow got the roof in the back of me van and the doors and windows in the hallway
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
-
- Posts: 889
- Joined: Fri Jan 18, 2008 9:32 pm
- Location: cheshire
-
- Posts: 2504
- Joined: Thu Jul 10, 2003 10:20 pm
- Location: hemel hempstead,herts. 01442 212315
Brace yourself, the shingles will take you a day alone!michaelthegardener wrote:
still got the shingles to do yet ! 3 days so far
Dan the Crusher Man
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
01442 212315
www.crusherhire.co.uk
"a satisfied customer? we should have them stuffed!"
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
do you think I need an underfelt before the shingles was thinking of this http://www.screwfix.com/p/protect-a1-roofing-underlay-1-x-45m/31795
got quite a bit of work on this week so would at least keep it dry
got quite a bit of work on this week so would at least keep it dry
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol
-
- Site Admin
- Posts: 4713
- Joined: Mon Jun 26, 2006 11:01 am
- Location: eastbourne
-
- Posts: 638
- Joined: Sat Jul 17, 2010 8:20 am
- Location: bristol