Hi Guys,
First, I'd just like to say thanks to you all for the great info I've got out of the site over the last few years!
Now, before I go and bugger up my already faded black limestone patio, I thought I'd just check for the latest advice.... I've laid it on a sharp sand/cement, and in some places (where the flags popped off) SBR slurry bed.
I'm now ready to seal/enhance the stone, and point the joints, would it be best to seal first to try and reduce picture framing?
Thanks in advance
Simon
Black kota - Advice on sealing
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact: