Sealant or impregnator - Protection from bird droppings
-
- Posts: 2
- Joined: Sat Aug 08, 2015 11:15 am
- Location: Surrey
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Posts: 70
- Joined: Wed Aug 17, 2005 2:19 pm
- Location: Wirral
Further to the OP's message. I will shortly be replacing my old Fossil Mint Sandstone paving with some something similar. The reason being is that the once vibrant colours are now completely black due to lichen and no amount of jet washing will remove it. They are as bad, if not worse than the examples shown on the website. My own fault really as the paving was never sealed.
My question is, while I read about stain prevention, will the impregnating sealants prevent the dreaded black spot from occurring.
My question is, while I read about stain prevention, will the impregnating sealants prevent the dreaded black spot from occurring.
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
paul, have you tried roger's jollop
right down the bottom of this page
make it stronger and the lichen gets zapped
LLL
right down the bottom of this page
make it stronger and the lichen gets zapped
LLL
-
- Site Admin
- Posts: 15184
- Joined: Fri Aug 04, 2006 12:20 am
- Location: bedfordshire
-
- Posts: 70
- Joined: Wed Aug 17, 2005 2:19 pm
- Location: Wirral
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
Hello WendyWTC wrote:Thanks Steve,
Could you recommend a product please? (Sorry if that's not allowed on this forum). I don't have any experience of paving and am struggling to know which product I need.
Wendy
There is a bewildering array of sealants and impregnators available. Some very good ones and unfortunately some very bad ones.
Dry Treat Stain Proof would always be the one I would recommend first. Its not cheap to buy but in the arena of impregnators you generally get what you pay for.
Lithofin Stain stop is another option that comes in a bit cheaper than the Dry Treat.
Are you planning to apply it yourself? If so, drop me a PM with your email address and I will email you across our PDF guide to sealing.
Steve
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Posts: 26
- Joined: Fri Jul 31, 2015 9:36 pm
- Location: manchester
Sorry to hijack the thread , but I asked this on mine and never got an answer - Would you recommend sealing the flags I laid (pics in the other post)
they are wickes buxton textured , just wanna get the best I can from them and not pick up any stains etc , Probably swaying towards the impregnator from what I read above , would it be suitable for the job ? Cheers .
they are wickes buxton textured , just wanna get the best I can from them and not pick up any stains etc , Probably swaying towards the impregnator from what I read above , would it be suitable for the job ? Cheers .
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
-
- Posts: 26
- Joined: Fri Jul 31, 2015 9:36 pm
- Location: manchester
Cheers Steve , is there anything I should watch out for during application , or is it straight forward ?
I like the sound of the colour enhancer as they look so much better when they are wet .
One last question , after applying the resin mortar , there's still a greasy film on the flags , when I hose them and sweep it foams a bit , I know this will go with time ,
However what do you think about sealing them so soon , shall I wait till everything comes off naturally , or keep hosing and scrubbing ?
I like the sound of the colour enhancer as they look so much better when they are wet .
One last question , after applying the resin mortar , there's still a greasy film on the flags , when I hose them and sweep it foams a bit , I know this will go with time ,
However what do you think about sealing them so soon , shall I wait till everything comes off naturally , or keep hosing and scrubbing ?
-
- Posts: 2199
- Joined: Mon May 10, 2010 1:07 pm
- Location: Surrey
- Contact:
There are some very important rules to follow, but as long as you follow them its a straight forward process.
If you PM me your email address I will send you over one of our sealing guides. They are very detailed and cover every eventually
I wouldnt recommend continually hosing and scrubbing. Give it a few weeks and the residue will come off on its own
Steve
If you PM me your email address I will send you over one of our sealing guides. They are very detailed and cover every eventually
I wouldnt recommend continually hosing and scrubbing. Give it a few weeks and the residue will come off on its own
Steve