Multicoloured patches of concrete - How to consolidate

Other groundworks tasks, such as roads and footpaths, terracing, fencing, foundations, walls and brickwork, tools and plant.
Post Reply
lana
Posts: 62
Joined: Thu Jun 06, 2013 2:12 pm
Location: Oxfordshire

Post: # 105505Post lana

Hi Helpful Folks,
Just wondering if somebody might give me an idea based on their expertise.
After a series of renovation projects from different times I ended up with the "patchwork" of the multiple coloured concrete/slabs/others mix:
Image
the area is under the back garden gate: blue-grey granite slabs of the patio from inside, three colours of concrete of different age from outside. Looks funny, if not silly, doesn't it? Is there any easy way to "screed" over the outside area or even - paint it over, so that at least, it'll be just two colours meeting under the gate?

Any thoughts, please?
thanks a lot in advance!
Lana
~Lana~

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 105507Post seanandruby

Hi again Lara.
yes you can overlay using a thin bed of grano.
you'll need to powerwash the area and fill any voids first.
there are other materials on the market but they are very expensive, grano being the cheapest fix of all.
look here
sean

lana
Posts: 62
Joined: Thu Jun 06, 2013 2:12 pm
Location: Oxfordshire

Post: # 105515Post lana

Sean, thanks you very much! I've got one more question though: it says on Tony's pages the thickness should be no less then 20mm...well, all coloured patches in my case meet at the same level. there is no doorstep or drop between them. This was made to accommodate the need for wheelchair to get through...so if I'm to put grano mix, that will create a gap of 20mm which is undesirable...or should I just be able to smooth the grano mix down towards the edge?
thanks in advance!
Lana
~Lana~

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 105516Post seanandruby

How thin is it going to be? Try and aim for 20 ml but if it is slightly less in the parts you.mention don't worry to much. Remember it is 6ml to dust so anything to sparse will make it difficult to finish and will look boney. It is really hard stuff to mix, especially in a mixer because it 'balls' and then doesn't mix propererly. Remember to clean the existing, scabble it and fill in the low spots.
sean

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 105519Post lutonlagerlout

TBH I would either paint it or cut a rectangle with the cut off saw and put a 100mm of fresh concrete in there
painting it being the easiest option
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

mickg
Posts: 2598
Joined: Wed Apr 08, 2009 8:01 am
Location: Peoples Republic of Westhoughton
Contact:

Post: # 105520Post mickg

I concur with Tony, to add a thin layer of grano is a failure, needs cutting out and making into one area with a minimum depth of 100mm
Crystalclear
Driveway and Patio Installer

Call us today
01942 840109
7 days a week 8am till 8pm

Driveways Patios and Paving Specialists
Driveways

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 105521Post seanandruby

I've never had a grano overlay fail. It just needs to be done right. Think the existing is to rough to give a nice looking paint finish. The breaking out and concreting is an option replacing concrete with concrete ??? Might as well go for the same slabs.
sean

lana
Posts: 62
Joined: Thu Jun 06, 2013 2:12 pm
Location: Oxfordshire

Post: # 105526Post lana

thanks guys! I'm not too comfortable about cutting out (never done one, don't have tool) I think, if I'd hire a tool and try, I might spoil it even more :-/ Painting looks the easiest option, I can even be creative and paint something like "welcome" mat :-) but where do I get the paint that survives outdoors?
~Lana~

Post Reply