Black exterior wood screw with phillips heads

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Post Reply
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 105085Post Forestboy1978

Everyone wants these damn fence panels painted dark brown and gates with black ironmongery at the moment. I'm simply not fitting another damn gate with plane headed screws, it drives me insane. They are crap, should no longer exist and the "jappaned" screws are just a bit too thick to so getting locks lined up is a PITA.

Anyone know of the existence of exterior wood screws, black, phillips, 1 inch in length?

Cheers
Top
lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 105087Post lutonlagerlout

often wondered this myself
32 mm drywalls are too feeble and spax and fischer are too gold or silver
have you tried doing a 2mm pilot for the japanned screws ?
PITA I know but has worked for me
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE
Top
darrenba
Posts: 77
Joined: Sat Jul 05, 2008 6:47 pm
Location: Dorset, UK
Contact:
Contact darrenba

Post: # 105091Post darrenba

These are the closest I could find, not quite black though

http://www.screwfix.com/p....13
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 105133Post Forestboy1978

lutonlagerlout wrote:often wondered this myself
32 mm drywalls are too feeble and spax and fischer are too gold or silver
have you tried doing a 2mm pilot for the japanned screws ?
PITA I know but has worked for me
LLL
Drywalls will rust almost immediately and yeah they're too weak.

I will have to do the pilot hole and dare I say it, I will have to use a drill driver and banish the impact driver :O Damn thing keeps bouncing out.
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 105134Post Forestboy1978

darrenba wrote:These are the closest I could find, not quite black though

http://www.screwfix.com/p....13
Not a bad alternative. I may buy some and see how green they actually are. I mean, I personally wouldn't have an issue with them on black hinges etc. perhaps some would. Dunno, I'll take a look cos anything is better than those jappaned screws.

Cheers
Top
digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 105138Post digerjones

Don't think dry wall screws will rust. If they did the plaster would pop.
dylan
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 105140Post Forestboy1978

They rust like buggery mate!

I'm guessing the reason they don't under plaster is cos they're only wet once, until it dries, and there is no oxygen.
Top
digerjones
Posts: 889
Joined: Fri Jan 18, 2008 9:32 pm
Location: cheshire

Post: # 105147Post digerjones

I stand corrected. What about stainless, the quality panel /gate makers up here use them.
dylan
Top
Forestboy1978
Posts: 1000
Joined: Sun Oct 23, 2011 9:57 am
Location: southampton, hampshire

Post: # 105162Post Forestboy1978

Yeah I use them generally but I can't use them for black ironmongery. Just wont look right!
Top
Post Reply

Return to “Tools and Plant”