What's this? - How is it used?

For the discussion of hand tools, power tools, operated and non-operated plant, and all sorts of kit associated with the paving and drainage trades
Aalindo
Posts: 55
Joined: Sun Mar 02, 2014 9:59 am
Location: Lincoln

Post: # 103867Post Aalindo

I have several large rolls of this. Not 100% sure what it is or how it should be used. Have found similar rolls on the Internet, but I'm looking to confirm whether I could/should use it as a layer between my sub-base (clay) and type 1 when I construct my new domestic gravel driveway. If that's a good use for it, is it plastic grid face up or down?
Image
Thanks for the help.

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 103869Post seanandruby

Looks like a composite geogrid textile
sean

Aalindo
Posts: 55
Joined: Sun Mar 02, 2014 9:59 am
Location: Lincoln

Post: # 103870Post Aalindo

Looks like you're right. A quick google of composite geogrid textile suggests that it could be used under my drive, or even under the darm tracks that intend to lay. There's a fair few rolls of it here, so even if it's a bit overkill, at least it won't do any harm or go to waste. Many thanks.
Thanks for the help.

DNgroundworks
Posts: 1951
Joined: Sat Dec 06, 2008 10:28 pm
Location: Preston, Lancashire

Post: # 103874Post DNgroundworks

Few quid there id imagine.

Id say plastic grid up (i have no idea)

Dave_L
Site Admin
Posts: 4732
Joined: Fri Jul 28, 2006 8:47 pm
Location: Somerset
Contact:

Post: # 103875Post Dave_L

Ground stabilisation fabric, useful stuff
RW Gale Ltd - Civils & Surfacing Contractors based in Somerset

See what we get up to Our Facebook page

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 103878Post lutonlagerlout

plastic grid down from where i sit
be warned its a bugger to cut
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 103879Post seanandruby

The right way is..well the way it is rolled up speaks for itself, just roll it out. You wouldn't wanna be turning that over in a hurry especially if it was wet :;): :) Run a petrol saw through it to cut it, easy peasy.
sean

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 103886Post lutonlagerlout

oh sean oh master of HSE!
using a cut off saw to cut that could result in all sorts of nasties
(i know because I have done it)
as you cut through the last bit the stuff springs up and that black plastic is like razor wire when just cut
I would suggest Full PPE and a junior hacksaw :laugh: :laugh: :laugh:
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 103896Post seanandruby

Oh LLL master of all, do you really think i would let that happen? That's why god invented feet.. to stand on it, it is anchored down m8. Would love to watch you cutting through roll after roll on a motorway job with a junior hacksaw with lorry loads of crush waiting too be tipped. We take every precaution as per method statement/ risk assesment ppe being just one offf them :laugh: :laugh: :laugh:
sean

mickg
Posts: 2598
Joined: Wed Apr 08, 2009 8:01 am
Location: Peoples Republic of Westhoughton
Contact:

Post: # 103898Post mickg

Lol @sean
Crystalclear
Driveway and Patio Installer

Call us today
01942 840109
7 days a week 8am till 8pm

Driveways Patios and Paving Specialists
Driveways

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 103901Post lutonlagerlout

I have cut it with the wizzer and its hard to stand on both sides of a 4m roll simultaneously
it is a bugger to cut for sure!
LLL :;):
"what,you want paying today??"

YOUR TEXT GOES HERE

DNgroundworks
Posts: 1951
Joined: Sat Dec 06, 2008 10:28 pm
Location: Preston, Lancashire

Post: # 103907Post DNgroundworks

oh....chainsaws out then

seanandruby
Site Admin
Posts: 4713
Joined: Mon Jun 26, 2006 11:01 am
Location: eastbourne

Post: # 103909Post seanandruby

At the end of the day it sometimes has to be cut, so obviously we would all exercise caution. And as LLL rightly pointed out full ppe must be worn. Goggles, gloves, ear plugs, dust mask, wellies, hard hat, overalls, water supresent, cutting area, risk asessment, method statement and that's just for a junior hacksaw :;): :)
sean

DNgroundworks
Posts: 1951
Joined: Sat Dec 06, 2008 10:28 pm
Location: Preston, Lancashire

Post: # 103910Post DNgroundworks

The funny thing is, you aint joking neither!

lutonlagerlout
Site Admin
Posts: 15184
Joined: Fri Aug 04, 2006 12:20 am
Location: bedfordshire

Post: # 103911Post lutonlagerlout

what my main point was its wicked stuff the geogrid!
LLL
"what,you want paying today??"

YOUR TEXT GOES HERE

Post Reply